Clean Cut Touchless Paper Towel Dispenser Review

Cloth and paper towels have their uses in my kitchen. Paper towels are difficult to use because I often get too much or two little towel, or I make make a mess of the whole roll of paper towel. I have been looking at automatic dispensers and found one that I like.

One of the paper towel dispensers I considered was the enMotion Automated Motion-Activated Touchless Paper Towel Dispenser that has become common in commercial settings in the last few years, including where I work. I’ve had a chance to check them out pretty good and even if I was to ignore it’s looks, I find that the enMotion doesn’t consistently detect a hand in front of the sensor requiring multiple swipes in front the of the sensor for it to work properly.

Several years go the iTouchless Towel-Matic Automatic Sensor Paper Towel Dispenser and a more recent Towel-Matic II Came out that would be more approprate for my kitchen. Neither one has had good reviews with issues about sensing hands and how it dispenses individual towels.

Recently the Clean Cut Touchless Paper Towel Dispenser came out and seems to address the problems with the other paper towel dispensers.

Clean Cut Touchless Paper Towel Dispenser Installed In My Kitchen
Clean Cut Touchless paper towel dispenser installed in my kitchen, which is sort of under construction.

Where the enMotion and iTouchless employ a sensor which expects a hand to placed in front of it in a certian place, the Clean Cut employes a break the beam set up. Where the hand must be placed between the sensor and the beam emmiter. This is big advantage for the Clean Cut since it is easy to determine where to put your hand to activate the dispenseor and there’s no guess like the other dispensers.

The Clean Cut does not try to detect where the paper towel perforations are. It has one sensor to dispense the paper towel and another to deploy the cutter. You can make towels however long you want, but it can hold the towels enough that you can reach down and tear off a piece at the perforations if they are exposed. I found myself doing this at first until I got used to using the cutter.

Clean Cut Touchiness Paper Towel Dispenser Open For Loading
Clean Cut Touchiness Paper Towel Dispenser Open For Loading

The Clean Cut has one mounting option, it mounts horizontally under a cabinet. I would have prefered to have a vertical wall mount option. To load a roll of paper towel, there is a latch on the front in the middle. When the latch is operated the unit swings down and and the roll of paper is placed on a bar. I find the operation of the Clean Cut’s loading mechanisms to work very well and I like the design but I think it makes the whole unit bulky.

Clean Cut Touchless Paper Towel Grippers
Clean Cut Touchless Paper Towel Grippers

The towel gripper and motorized roller can grip any size or texture of paper towel. It takes no effort to load a new paper towel into the gripper, I have set the end of the paper towel into the gripper haphazardly and it still managed to grab a hold of the paper towel and dispense it.

The Clean Cut is powered by a wall transformer. There is not battery powered option. I wish the transformer was built into the device rather than having a brick attacked to the power outlet.

In conclusion I find the Clean Cut Touchless paper towel dispenser to be well designed, easy to use and I have managed not to break it. It does what it’s supposed to, dispense paper towels and is easy to load. It was expensive and the unit is bulkier and doesn’t have a lot of mounting options.

Costco La Crosse Technologies Weather Station WS-2810

IMG_0610

Costco has La Crosse Technologies weather center that appears to be the same as the La Crosse Weather Pro Center WS-2810. I couldn’t find any markings on the package at the Costco in Albuquerque other than Costco Specific.

The WS-2810 is has PC compatibility using a wireless USB dongle. I’m interested to know if it’s Mac compatible. La Crosse only supplies PC software but I’m using WeatherTracker by After Ten Software with a similar wired model I picked up last year. This wireless model looks to be improved over the wired model I have now.

Costco’s price was around $80 and the La Crosse website lists the WS-2810 at $249.99. I did not see a simialr model on Amazon’s La Crosse Technology Professional Weather Center page (Update: There are 2810’s on Amazon
, they are not labeled as such are there are currently none available).

The description from La Crosse’s website.

DDE33291-A69D-41CD-A7E2-94F84DED8CF6.jpgWS-2810
Weather Pro Center:
Wind • Rain • Weather •
PC Software
$249.99

  • Included PC Interface
  • Wind Chill, Direction and Speed
  • Solar Powered Wind Sensor
  • Rain Data
  • Forecast w/ Tendency
  • IN/OUT Temp
  • IN/OUT Humidity
  • Weather Alarms w/ Storm Warning

Dimensions:
Receiver: 4.59" x 0.94" x 7.01"
Thermo-hygro:3.13" x 3.54" x 7.45"
Rain Sensor: 5.18" dia. x 7.19"
Wind Sensor:9.84" x 5.74" x 11.11"

My next option would be the Vantage Vue wireless weather station for about $300 at Amazon which is considerably more expensive.